Home/Accessories/Shelving Accessories/Shelf Divider Full Height

Shelf Divider Full Height

Used to sub-divide the shelf into smaller compartments. The divider is secured by four pins that fit into the oval holes along the top and bottom of the shelf and shelf beam.

One set of pins are shorter than the other, these shorter pins are located at the bottom of the divider and fit through the holes in the shelf/beam below.

The divider height is fixed to the shelf pitch as it requires to be secured to both the shelf above and below.
Note: This accessory can only be used with short span shelving.

The divider location is adjustable on a 59.25mm pitch.

Size: The height is the pitch between the top surfaces of the shelves, (i.e. the clear compartment height plus a 31mm shelf).
Material: 0.6 or 0.8mm thick steel dependent upon divider size
Finish: pre-galvanised

View more shelving accessories

Longspan - Z Beam Label Support

Shelving Accessories

Keeping up with the cut and thrust of warehouse operations. Using your space as efficiently as possible. Staying one step ahead of the latest regulations.

Hi280 - Sloping Shelves

Sloping Shelves

Sloping shelves will improve visibility of the stored goods and ease the picking process.

Hi280 - Gratings

Perforated Shelves

Allows water to pass through the permeable mesh to improve fire safety.

Hi280 - Drip Tray

Drip Tray

Usually installed underneath the Barrel Support, in order to prevent floor spilling.

Hi280 - Barrel Support

Barrel Support

Small barrels are often placed on barrel supports in a HI280 Medium span or short span bay to allow tapping.

Hi280 - Loop Dividers

Loop Dividers

The loop divider is used for the storage of bulky parts such as hoods, doors and so on, standing in an upright position.

Hi280 - Side Panel Slotted

Slotted Side Panel

The shelving bay can be equipped with slotted panels for the storage of tools, equipment or other small to average sized products.

Hi280 - Slotted Back Panel

Slotted Back Panel

Shelving bays can be equipped with slotted panels for the storage of tools, equipment or other small to average sized products.

Hi280 - Back Cladding

Full Width Solid Back Cladding

The cladding is positioned between the back uprights within a bay to enclose the storage compartment.

Hi280 - Base Plinth

Base Plinth

Fitting at the front, below first shelf, a plinth prevents items from entering the space beneath.

Hi280 - Tire Support Bracket

Tire Support Angle

Used to store tires and / or tire and rim combinations. Tire rests on a larger surface to avoid point loads and flat spots.

Hi280 - Sign Holder

Sign Holder

A sign that can be put up at the ends of rows of shelving to assist identification and orientation of the installation.

Hi280 - Bin Front

Bin Front

Fitted to the front and/or back of a shelf to prevent items falling from the shelf. Can be stacked on top of each other.

Hi280 - Lockable Doors

Lockable Doors

Full and part height lockable doors with double locking points, to top and bottom.

Hi280 - Tube Rails

Tube Rails

This part can be used as clothes rail, or in pairs to support tyres etc. Items can be hung from the rail by using hooks.

Plastic Trays And Bins

Plastic Trays and Bins

We offer a wide range of plastic trays and bins, from the very small parts bin, all the way up to the large Euro Containers.

Hi280 - Drawers

Pull Out Tray and Drawers

Suitable for storage of smaller goods. Supported on a pair of expansion slides.

Hi280 - Drawers

Drawer Nest

Is a build-up nest with 8 or 12 drawers that can be easily inserted inside a shelf compartment. The drawers can be sub-divided front to back.

Hi280 - Bay Divider

Bay Divider

The divider is placed across the Short or Medium Span beam and it allows fast and direct access.

Hi280 - Shelf Divider Part Height

Shelf Divider Part Height

Used to sub-divide the shelf into smaller compartments. Independent of shelf pitch. Secured to the shelf below.

Hi280 - Infill Shelf Chipboard

Chipboard Shelves

Chipboard shelf for medium span beams with cross beam supports underneath.

Hi280 Infill Steel Shelf

Steel In-Fill Shelves

For medium span beams, the In-fill panel is used front to back creating a strong steel storage level.

Longspan - Z Beam Label Support

LS3 Longspan Z Beam Label Support

The Label Support, made from 1 mm thick material, can be inserted in the upper lip of the stepped Z-Beam allowing adding sticky labels.

View more systems accessories products

Mezzanine Accessories

Accessories

Our custom-designed systems come with a wide selection of safety and security accessories to complement and further customise your facility’s set-up.

Pallet Racking Accessories

Pallet Racking Accessories

If you’re looking for racking for your warehouse or storage facility that’s a little less ‘off-the-shelf’, Dexion are the team that can provide you with a truly tailor-made solution.

Cantilever Accessories

Cantilever Accessories

For the safe, organized storage of long and heavy goods, our made-to-measure Cantilever systems and accessories are your perfect fit.

Machines Accessories

Machines Accessories

For the vast majority of warehouse and storage facilities, efficiency and space savings are the order of the day, especially when every square foot can really make a difference.

Safety Accessories

Safety Accessories

All our storage solutions are manufactured to the highest quality and designed to stand the test of time, even in the most intense of operating environments.

Mezzanine Accessories

Mezzanine Accessories

Adding a mezzanine floor can dramatically increase your storage space.  It makes it possible to place shelving on the floor, which means extra storage space but how practical is it?